|
A proximity fuze is a fuze that detonates an explosive device automatically when the distance to the target becomes smaller than a predetermined value. Proximity fuzes are designed for targets such as planes, missiles, ships at sea and ground forces. They provide a more sophisticated trigger mechanism than the common contact fuze or timed fuze. British military researchers Sir Samuel Curran and W. A. S. Butement invented a proximity fuze in the early stages of World War II under the name VT, an acronym of "Variable Time fuze". The system was a small, short range, Doppler radar that used a clever circuit. However, Britain lacked the capacity to develop the fuze, so the design was shown to the United States during the Tizard Mission in late 1940. The fuze needed to be miniaturized, survive the high acceleration of cannon launch, and be reliable. Development was completed under the direction of physicist Merle A. Tuve at The Johns Hopkins University Applied Physics Lab (APL). Over 2000 American companies were mobilized to build some 20 million shell fuzes. The proximity fuze was one of the most important technological innovations of the war. It was so important that it was a secret guarded to a similar level as the atom bomb project or D-Day invasion. Adm. Lewis L. Strauss wrote that, "One of the most original and effective military developments in World War II was the proximity, or "VT," fuze. It was of incalculable value to both the Army and Navy, and it helped save London from obliteration. While no one invention won the war, the proximity fuze must be listed among the very small group of developments, such as radar, upon which victory very largely depended." The fuze was later found to be equally useful causing artillery shells to explode in air bursts, greatly increasing their anti-personnel effects. The Germans were supposedly also working on proximity fuzes in the 1930s, based on capacitive effects rather than radar. Research and prototype work at Rheinmetall were halted in 1940 to devote available resources to projects deemed more necessary. In the post-WWII era, a number of new proximity fuze systems were developed, including radio, optical and other means. A common form used in modern air-to-air weapons uses a laser as an optical source and time-of-flight for ranging. ==History== Before the proximity fuze's invention, detonation was induced by direct contact, a timer set at launch, or an altimeter. All of these earlier methods have disadvantages. The probability of a direct hit on a small moving target is low; a shell that just misses the target will not explode. A time- or height-triggered fuze requires an accurate prediction; if the setting is wrong, then even accurately aimed shells may explode harmlessly before reaching the target. With a proximity fuze, the shell or missile need only pass close by the target at some time during its trajectory. The proximity fuze makes the problem simpler than the previous methods. Proximity fuzes are also useful for producing air bursts against ground targets. A contact fuze would explode when it hit the ground; it would not be very effective at scattering shrapnel. A timer fuze can be set to explode a few meters above the ground, but the timing is critical and usually requires observers to provide information for adjusting the timing. Observers may not be practical in many situations, the ground may be uneven, and the practice is slow in any event. Proximity fuzes fitted to such weapons as artillery and mortar shells solve this problem by having a range of pre-set burst heights (e.g. 2, 4 or 10 metres, or about 7, 13, or 33 feet) above ground that are selected by gun crews prior to firing. The shell bursts at the appropriate height above ground. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Proximity fuze」の詳細全文を読む スポンサード リンク
|